The closest location is too far to drive to from where I live since I don't get very long to be off and can't leave my car there for more than the same day. I have a P0451 EVAP system Pressure Sensor/Switch "A" circuit range performance error that disables multiple features. I have replaced all parts listed with official oem parts so far and none have resolved the issue. OEM PCV valve with hose, Hitachi Fuel pump with oem gasket, Denso spark plugs (Fuji heavy oem), Denso MAP sensor, Denso MAF sensor, and a few other things and still no luck along with checking all hoses for wear or dry rot. I've got an extra entire charcoal canister assembly with hoses and evap purge but I don't have a lift to install it. From what I have read there is a known wiring harness issue that causes it on the 2012 -2013 Impreza (EJ20 and EJ25 both) that have a bad crimp on the main wiring harness that connects everything that sometimes the grounds will come lose but not sure where to look and solder them back in place. I work at the NMMC hospital so I do not have very much free time to drive there and back so if I was to bring it I would not be able to drop it off and leave it overnight.